Trang chủ
Giới thiệu
Diễn đàn
Sản phẩm
Ứng dụng
Liên hệ
RENOLIT CXI 2
Thông tin sản phẩm
Calcium Complex Grease for Severe Conditions
RENOLIT CXI 2 was developed to work under severe conditions in roller and plain bearings in steel mills, paper industry, mining, concrete, quarries, construction equipment.
RENOLIT CXI 2 should be used for all lubricating points requiring a high performance concerning water resistance, working stability, EP and AW properties.
RENOLIT CXI 2 is easily pumpable even in long tubes, feed by centralized lubricating systems.
RENOLIT CXI 2 is a optimized Calcium-Complex thickened grease based on selected base oils.
RENOLIT CXI 2 shows very good characteristics concerning water resistance, even concerning acids and alkaline solutions, working stability, corrosion protection and oil bleeding.
Characteristics:
| Properties | Unit | Value | Test method |
| Thickener | lithium soap | ||
| Temperature range | °C | - 20 to 160 | |
| Dropping point | °C | 190 | ISO 2176/ASTM D 566 |
| NLGI grade | 2 | ||
| Worked penetration | 0.1 mm | 265 - 295 | ISO 2137/ASTM D 217 |
| Working stability, difference after 100,000 strokes | 0.1 mm | <15 | ISO 2137/ASTM D 217 |
| Water-spray-off | % | 5 | ASTM D 4049 |
| Water-wash-out at 40 °C | % | 0,5 | IP 215 |
| Rust inhibiting properties SKF-Emcor with 3% NaCl | degree of corrosion | 0 and 1 | DIN 51802/IP 220 |
| Base oil viscosity at 40°C | mm²/s (cSt) | app. 300 | ISO 3104/ASTM D 445 |
| Oil separation at 40 °C/18h | % Wt. | <0,1 K | DIN 51817/IP 121 |
| Oil separation at 120 °C/7h | % Wt. | <1 | DIN 51817/IP 121 |
| Four ball EP-test, weld load | N | >5000 | ASTM D 2596 |
| Timken OK load | lbs. | 55 | ASTM D 2509 |
| DIN classification | KP 2 P-20 | DIN 51825 | |
| ISO classification | L-XBEIB 2 | ISO 6743-9 |
Bình luận
Sản phẩm cùng loại
-
GLEITMO 591
Giá: Liên hệ
MỠ CHỊU NHIỆT
MỠ SILICONE
